ENGLISH
Food cannot be
processed
The shaft does
not rotate
White smoke
comes out of
the appliance.
The appliance
is too hot
7. TECHNICAL SPECIFICATIONS
Product reference: 04351
Product: Comino 1000
Power: 500 W
Engine blocking power: 1000 W
Voltage: 220-240 V
Frequency: 50/60 Hz
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
32
COMINO 1000
Ingredients are
too greasy.
Ingredients are
too greasy.
The accessory
you are using
has not fitted
properly.
The motor is
blocked.
The appliance is
faulty
The motor has
been blocked for
too long
Cut the food into several pieces, not too small, until
it fits right through the feed hole in the cover of the
processing bowl.
Due to the strength of the product, this does not
usually occur, but some foods may be excessively
hard. To soften them, place them for a few seconds in
the microwave.
Fit the fitting properly on the shaft so that it rotates
on the shaft.
The motor may not work, even if the appliance
is switched on. In that case, contact the official
Technical Support Service of Cecotec.
Contact the official Cecotec Technical Support Service.
It is not usual, but it may be that the food is not being
ground properly and the motor has been blocked for
too long, causing it to overheat. Allow to cool for at
least 10 minutes before reuse.