cecotec PAPRIKA 2000 FULL Manual De Instrucciones página 29

Box content
- Food processor
- Squeezing cone and filter
- Kneading blade
- Cutting blade
- French fries blade
- Mincing blade
- Grating blade
- Emulsifying disc
- Blades support
- Instruction manual
3. ASSEMBLY
To carry out the assembly of the food processor, you must take into account that depending
on the food you want to process, you will have to use one or other components. In general
terms, however, the steps to be taken are as follows:
1. In any case, you must first place the container on the base so that it fits into the grooves
and the position of the container is fixed and stable.
2. Then, place the tool holder on the motor shaft so that it is fixed and the two parts rotate
with each other.
3. On the tool holder place the blade of your choice, whether it is a cutting blade, a kneading
blade, the stirrer, the squeezing kit or the disc holder with the different options that fit
into the recess of the holder for processing food.
4. If using any type of blade, the lid should be placed over the processing bowl and, if
necessary, push the food into the recess to press it against the disc holder. The lid is fixed
on the bowl, so it does not move and is stable, just like the rest of the components.
To assemble the jar, the steps to follow are as follows:
1. Place the blade in the jar, using the lower part of the measuring cup, which is fitted to the
bottom of the blade to help you place it in the jar.
2. Place the jar, with the blades attached, on the processing base so that it is fixed and
stable. Make sure that the jar fits tightly by moving it counterclockwise.
3. Cover the jar and use the mould whenever the blades are running to avoid splashing.
4. If the filter is to be used for the preparation of concentrates or vegetable drinks, it should
be placed on the blades so that it is fitted into place, leaving the filter at the bottom and
the plastic structure at the top.
ENGLISH
PAPRIKA 2000 FULL 29