Shindaiwa BP510S Manual De Instrucciones página 26

Idiomas disponibles

Maintenance and care

Installing blade (option)

 Wear heavy duty gloves when working with the trimmer blade.

 When replacing the trimmer blade during a trimming task, ensure that the engine is switched off and that the blades

have stopped.

 When turning the product over to replace the trimmer blade, ensure that the fuel tank cap is securely in place.

 Do not attempt to fit the trimmer blade with one hand or without using the socket spanner. Fit the trimmer blade ac-

curately using the supplied socket spanner and tighten firmly in position.

 Do not use any tools other than the provided socket spanner to tighten the blade; a pneumatic or electric tool may

tighten the blade more than necessary and cause the nut or the output shaft to break.

 If worn nut and cup for blade are used, there is a danger of blade getting loose. Replace them with new one.

Failure to do so could lead to an injury or serious accident, or cause a fire.

Checking the blade

WARNING

Inspect blades (A) before installation. Check for sharpness.

Dull blades increase the risk of blade kickback reactions.

Small cracks can develop into fractures resulting in a piece

of blade flying off during operation. Discard cracked blades

no matter how small the crack.

Insert locking tool (B) into a hole located on the right side of

angle transmission while forcing retainer spring to the left

side.

Insert locking tool further into blade retainer fixing slot (C) to

fix output shaft.

Using the socket wrench, remove the nut (D), cup (E), and

lower blade retainer (F).

Securely tighten the blade, lower blade retainer, cup, and nut

by hand.

 Fix output shaft securely using locking tool in order to

prevent it form rotating when blade is mounted. Other-

wise, the blade fastening nut will not be tightened suffi-

ciently.

Tighten the nut (turn anticlockwise) using a socket wrench.

Never fasten while applying your weight. Otherwise the

thread of nut could be broken.

Remove locking tool.

 Use only blade designated for this model by the manufacturer.

 When a crack is noticed on the blade, do not use it but replace

with a new one.

 Ensure that the blade is correctly fitted in accordance with the

instructions.

CAUTION