Publicidad
Idiomas disponibles
Idiomas disponibles
Operations
06 Soil
07 Pre Soak
08 Spin Only
09 Smart Care
10 Delay End
11 Sound Off
12 Smart Control
13 Power
14 Start/Pause
(Hold to Start)
34
English
Untitled-4 34
Press to change the soil level for the current cycle.
• Heavy (Level 5): For extremely soiled loads.
• (Level 4): For heavily soiled loads.
• (Level 3): For moderately soiled loads. This setting is best for most loads.
• (Level 2): For lightly soiled loads.
• Light (Level 1): For barely soiled loads.
Press to add 30 minutes of soaking time at the start of the wash cycle for better
stain removal.
To perform the spin process only. With the cycle time on the display, press Spin
repeatedly until a desired spinning speed is selected. Then, press and hold
Start/Pause (Hold to Start) to start.
This function enables you to check the status of the washer using a smartphone.
Set the washer to finish your wash automatically at later time. Choose a delay of
between 1 to 24 hours (in 1 hour increments). (For more information about Delay
End, see page 40.)
Press to turn the alarm sound on or off. When the alarm is off, the cycle
completion melody and the power-off beep will not sound. However, button and
alert sounds will remain on.
After connecting the washer to your home network using the SmartThings app,
you can control the washer remotely. When started, the Smart Control indicator
blinks and the front door locks. The washer enters waiting mode and waits
for remote commands. (For more information about Smart Control, visit the
SmartThings app page.)
Press to turn the washer on or off.
Press and hold to start operation or press to stop operation temporarily.
2023-08-07
12:16:53
Publicidad
