Charger TCL 6 Manual De Instrucciones Original página 5

– Protect the charger from metal components (e.g. swarf) and liquids.
WARNING!
–
charger.
– Do not use battery packs from other manufacturers with this charger.
Do not use power supply units or battery packs from other manufac­
turers to operate cordless power tools. Do not use chargers from oth­
er manufacturers to charge the battery packs. The use of accessories
not expressly authorised by the manufacturer can result in electric
shocks and/or serious accidents.
– When the charger is in the Systainer, it must not be connected to the
mains outlet.
– Protect the machine from moisture.
– Protect the mains power cable from heat, oil and sharp edges.
– If the supply cord is damaged, it must be replaced by an authorised
service workshop in order to avoid a hazard.
– Check for damage before using the device in order to avoid hazards, es­
pecially the mains power cable, the mains plug and the housing. In the
event of damage, have repaired by an authorised service workshop only.
– Do not cover vent openings on the charger. The charger may overheat
and not work properly.
– There is a risk of vapours being released if the battery pack is dam­
aged or not used correctly. The vapours may irritate your airways. Seek
fresh air and consult a doctor if you feel unwell.
3 Technical data
Charger
Power supply (input)
Mains frequency
Charging voltage (out­
put)
Charging current
Charging times for BP and BPC battery packs, approx.
4.2 Ah
3.0 Ah / 3.1 Ah
4.0 Ah
5.0 Ah / 5.2 Ah
6.2 Ah
Do not use non-rechargeable batteries with this
TCL 6
120 V~
60 Hz
10.8–18 V
Max. 6 A
76 min.
33 min.
32 min.
45 min.
53 min.
TCL 6 DUO
120 V~
60 Hz
Output1: 10.8–18 V
Output2: 10.8–18 V
Output1: Max. 6 A
Output2: Max. 6 A
76 min.
33 min.
32 min.
45 min.
53 min.
English
5