Publicidad
Idiomas disponibles
Idiomas disponibles
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.Use of
dust collection can reduce dust-related hazards.
3) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the rate
for which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any adjust-
ments, changing accessories, or storing power
tools. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of child-
ren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
e) Maintain power tools and accessories. Check for
misalignment or binding of moving parts, brea-
kage of parts and any other condition that may
affect the power tool's operation. If damaged,
have the power tool repaired before use. Many
accidents are caused by poorly maintained power
tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use power tools, insert tools, insert tools,
etc. according to these instructions. Take into
account the working conditions and the work to
be carried out. Use of the power tool for operations
different from those intended could result in a hazar-
dous situation.
h) Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
4) Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts.This will ensure that the safety of the power tool
is maintained.
Safety information for agitators
Operation is only allowed with a safety
switch against stray current (RCD max. stray
current of 30mA).
Keep children and other persons including animals in
a safe distance when using the appliance.
Wear suitable work clothing such as sturdy shoes with
non-slip sole, safety glasses and hearing protection!
The dust produced when using this tool may be
harmful to health. Do not inhale the dust. Use a dust
absorption system and wear a suitable dust protec-
tion mask. Remove deposited dust thoroughly, e.g.
with a vacuum cleaner.
Do not wear loose clothing or jewels as they could get
caught by the rotating parts. Do not use the device
when you go barefoot or wear open sandals.
Please turn the device immediately off when the
tool used gets blocked! Do not turn the device on
again when the tool is still blocked. This could cause
bounce back with a high reaction moment. Deter-
mine and remove the cause of the blocking of the
tool used while respecting the safety instructions.
Possible causes include::
• Jamming
• Overload of power tools
Do not reach into the running device.
Always keep the connection cable from the working
area of the device. Always guide the cable back-
wards, away from the device!
Check all screw and plug-in connections and
protective equipment if firm and tightened
properly and whether all moving parts are
running smooth whenever the appliance is to be
put into operation.
The appliance must not be used if damaged
or safety equipment is defective. Replace any
worn-out and damaged parts.
Do not use the device near flammable liquids or
gases. Risk of fire and explosion in case of short
circuit.
Work instructions
Do not reach into the rotating mixer (rotating
stirrer).
Hold the device firmly with two hands and away from
your body.
Avoid splashing! Work with low revolutions when im-
mersing or removing the mixed to / from the mixture
being stirred.
ENGLISH
13
Publicidad
