Publicidad
Operating instructions
Wet the bristles of the brush head and apply the desired amount of a dental care
product to the bristles. Point the bristles of the brush head towards the surface
of the teeth at approximately a 45° angle (see fig. C). Press the power button (3)
to turn on the device. Brush your teeth without putting excessive pressure on
the enamel. Every 30 seconds, the device will remind you to change the cleaning
zone by briefly stopping the vibration. Change the cleaning zone after each
reminder. The device will turn off automatically after 2 minutes of operation.
Operation modes of the device (see fig. А)
4 – "Soft" mode for delicate, soft brushing.
5 – "Clean" mode for daily teeth brushing.
6 – "Massage" mode for gum massage. Recommended for maintaining healthy
gums after brushing your teeth.
7 – "White" mode for teeth whitening. Recommended for people who smoke
and drink coffee and tea often.
8 – "Smart" mode for operation of the device according to the scenario set in the AENO app.
Maintenance
WARNING! Do not wash the device and its accessories in a dishwasher. Do not
use chemical or aggressive detergents, abrasive pastes, acids, solvents, or
metal sponges for cleaning.
WARNING! The device and its accessories should be cleaned after turning off
the device and disconnecting the charging base from the power supply.
The brush head bristles should be rinsed under running water (see fig. D). To
remove dirt on the handle of the device, rinse it under running water or wipe it
with a cloth dampened with water. Afterwards, wipe it with a dry cloth (see
fig. D). To remove dirt on the charging base, wipe it with a cloth dampened with
water. Afterwards, wipe it with a dry cloth.
Connecting to the AENO mobile app
Download the AENO mobile app from Google Play or App Store.
Create a new account or log in to an existing account.
Turn on the device by pressing the power button (3).
Make sure that the device battery is not low. The indicator (9) should glow green.
aeno.com/documents
9
Publicidad
