Publicidad
Downloaded by: pd-oliana on 07-03-2023 10:49 CET
Cleaning And Maintenance Of The Oven's Front Door Glass
Remove the profile by pressing the plastic latches on both left and right sides as shown in figure 21 and pull-
ing the profile towards yourself as shown in figure 22. Then remove the inner-glass as shown in figure 23. If
required, middle glass can be removed in the same way. After cleaning and maintenance are done, remount
the glasses and the profile in reverse order.Make sure the profile is properly seated in its place.
Figure 21
Rack Positions *
It is important to place the wire grill into the oven properly. Do not allow wire rack to touch rear wall of the
Rack 4
Rack 3
Rack 2
Rack 1
Changing The Oven Lamp
WARNING: To avoid electric shock, ensure that the appliance circuit is open before changing the lamp.
(having circuit open means power is off)
First disconnect the power of appliance and ensure that appliance is cold.
Remove the glass protection by turning as indicated in the figure on the left side. If you have difficulty in
turning, then using plastic gloves will help you in turning.
Then remove the lamp by turning, install the new lamp with same
Reinstall glass protection, plug the power cable of appliance into electrical socket and complete replacement.
Now you can use your oven.
Type G9 Lamp
WARNING: This product contains a light source of energy efficiency class G.
Figure 22
oven. Rack positions are shown in the next figure. You may place
a deep tray or a standard tray in the lower and upper wire racks.
Installing and removing wire racks
To remove wire racks, press the clips shown with arrows in the
figure, first remove the lower, and than the upper side from in-
stallation location. To install wire racks; reverse the procedure for
removing wire rack.
Type E14 Lamp
220-240 V, AC
15-25 W
Figure 24
Figure 23
specifications.
220-240 V, AC
15 W
Figure 25
Publicidad
