ULTIMEA Poseidon D60 Manual Del Usuario página 4

Note: When input Dolby Atmos source, 'Dolby Atmos' will be indicated as below.
Remote Control
" " : Power Button
1
Press to power on / Hold for 3 seconds to power off.
" " : e ARC
2
Press to switch to HDMI eARC channel.
" ": BT
3
Press to switch to BT channel and enter pairing mode. Hold for 3
seconds to disconnect current device and choose to connect to a new
device manually on your mobile phone / PC / TV (BT ID: Poseidon D60).
" ": OPT
4
Press to switch to OPT channel.
" ": AUX
5
Press to switch to AUX channel.
" ": EQ
6
Press to switch among Movie, Dialogue, Music mode, the display will
show: "Eq01", "Eq02", "Eq03".
" ": USB
7
Press to switch to USB channel.
" ": Volume Up
8
" ": Volume Down
9
" ": Previous
10
BT and USB mode: Skip to previous track.
" ": Next
11
BT and USB mode: Skip to next track.
" ": Play / Pause
12
For BT and USB mode only.
USB mode: Hold for 3 seconds to switch between single loop playback
and list loop playback.
" ": Surround
13
Press to adjust surround sound level, the display will
show: "ST-1", "ST 0", "ST 1".
" ": BASSMX
14
Press to adjust bass level, the display will show: "bS-1" , "bS 0" , "bS 1".
" ": Mute / Recover the volume.
15
3 CONNECT TO TV VIA eARC / ARC
eARC / ARC
HDMI
Step 1:
Connect one end of the HDMI cable to the
eARC / ARC port on the back of your TV.
Note:
Your TV's HDMI port needs to support eARC to transmit the Dolby Atmos audio format to your Soundbar.
Atmos：If you are watching a movie in the Dolby Atmos format, please set the audio output on your TV to Pass Through:
TV Settings > Home > Settings > Sound > Digital Audio Output > Pass Through
:
DTS If you are watching a movie in the DTS format, please set the audio output on your TV to PCM：
TV Settings > Home > Settings > Sound > Digital Audio Output > PCM
What's the difference between: HDMI IN, HDMI ARC, HDMI eARC?
HDMI IN is a standard HDMI input that allows you to connect devices to your TV or audio system. It supports audio and video signals, but it does
1
not support audio return channel (ARC) or enhanced audio return channel (eARC) functionality.
HDMI ARC is a special HDMI port that supports two-way communication between your TV and audio system. This means that audio can be sent
2
from your TV to your audio system, and audio system can send audio back to your TV.
HDMI eARC (Enhanced Audio Return Channel) is an updated version of HDMI ARC that supports higher quality audio formats such as Dolby
3
Atmos and DTS:X.
Note: Please turn on the "CEC" function on your TV.
When eARC / ARC is connected, your TV remote control can control the soundbar and TV simultaneously:
Turn on / off Adjust the volume
1 2
02
eARC
Step 2:
Then connect the other end into the eARC
port of the soundbar.
1
2
3
5
8
10
9
13
14
15
Step 3:
Press "eARC" button on the remote control
to select "eARC" input.
4
6
7
12
11