Publicidad
(EN) English
Operation
ON/OFF: Single click on the
1
turn off. The flashlight has memory function, will memorize default output
selections, but not flash modes or Turbo.
Default Output Selections: When the flashlight is on, single click on the
2
to cycle through Level 1- Level 2 – Level3 – Level 4 – Level 5 – Level 1.
Instant Turbo: When the flashlight is on, long press the
3
Turbo mode, single click to back to the previous output level. When the flashlight
is off, press and hold the
off.
Flash Modes: When the flashlight is on or off, click the
4
second to activate Strobe. Single click the
Strobe. Single click the
Lock/Unlock: When the flashlight is off, 4 times click any switch, the main light
5
will blink 3 times to indicate the locking of the flashlight. 4 times click on any
switch again will activate Eco mode to indicate the unlocking of the flashlight.
Breathing Light: At any mode, triple click the
6
breathing light. The breathing light has power-off memory function.
Remote Control
The switch and
1
Remote control range is 10 meters.
Charge the built-in battery of controller with 5V/1A device. Red light is charging,
2
green light is charging finished.
When it needs to be charged, the battery
3
be green.
If there is no operation after the flashlight is turned off for 2 hours, the remote
4
control function will enter the sleep state. If you want to turn on the remote
control again, double-click any key on the remote control. At this time, the red
and green lights of the remote control will flash slowly alternately until the
flashlight is lit, indicating that the remote control function is activated
successfully. (When the indicator light of the remote control is off and the
flashlight is not activated, try to put the remote control as close to the flashlight
as possible, and double-click any key on the remote control again to activate it.)
The factory default remote control is paired. If you find that the remote control is
5
not available, please press and hold the
switch to turn on the flashlight, single click again to
switch to activate the Turbo mode, release to turn it
switch to the previous output level.
switch are exactly the same as the switches on the flashlight.
- 07 -
switch to activate
switch and hold for 1
switch to swap between SOS and
switch to turn on/off the blue
indicator will be red. Otherwise, it will
switch and
switch on the flashlight
EN
switch
Publicidad
