Dometic GROUP Waeco CoolAir SP 950 Instrucciones De Montaje página 11

CoolAir SP950
4 Target group for this manual
The installation information in this manual is only intended for qualified
personnel at workshops, who are familiar with the guidelines and safety
precautions to be applied during the installation of vehicle accessory parts.
5 Intended use
The fastening frame is for fitting the condenser unit of the CoolAir SP950
HGV split air conditioner to the following vehicles: Scania Highline/Topline.
When fastening the fastening frame, use existing fastening points on the
vehicle. You do not need to drill new holes.
6 Fitting the fastening frame
NOTICE!
A
Observe the information in the installation manual when fitting the
WAECO CoolAir SP 950 HGV split air conditioner.
NOTE
I
Operating instructions can be found in the operating manual for the
WAECO CoolAir SP 950 HGV split air conditioner.
Basic assembly is described in fig. 1, page 3:
Item Designation
1 Fastening frame
2 Condenser unit
3 Cover
EN
Target group for this manual
11