Publicidad
Idiomas disponibles
Idiomas disponibles
7. Unpacking and setting up the appliance
Preparing the appliance
The packaging materials must be
undamaged.
Inspect the appliance for transport
damage.
On no account should a damaged
appliance be put into operation.
In case of damage, contact After Sales
Service www.ok-online.com.
ATTENTION
RISK OF DAMAGE!
Do not use sharp knives or other pointed
objects when opening to avoid damaging the
appliance.
Setting up the appliance
Remove the appliance and all accessories from
the carton.
1. Turn the appliance upside down.
2. Position the wheelbase assembly
between the end fins and secure to the
appliance with the wing screws and wing
nuts provided.
3. Tighten the wing nuts.
4. Raise the appliance again.
Place the heater at least 50 cm away
•
from furniture or other objects.
Do not use this appliance near a
•
bathtub, shower, washbasin or
swimming pool.
8. Cleaning and care
Regular cleaning and maintenance of the
appliance not only protects the environment
and saves energy, but also increases its
service life. The following description provides
valuable tips.
•
Always allow the appliance to cool
down completely before cleaning.
•
Always remove the plug from the
socket before cleaning.
•
Clean the air inlet/outlet grille
frequently with a dry cloth.
WARNING
ELECTRIC SHOCK HAZARD!
Disconnect the appliance from the
•
mains power supply.
WARNING
FIRE HAZARD!
To reduce the risk of fire, keep textiles, curtains
or other flammable materials at least 1 m away
from the air outlet.
Place the appliance
•
Set up the appliance in an easily
accessible location.
Set up the appliance on a level, dry and
•
sufficiently stable surface.
Do not place the appliance at the edge
•
of a surface.
Do not place any objects on the
•
appliance.
Never expose the appliance to high
•
temperatures (heaters, etc.) or adverse
weather conditions (rain, etc.).
Switching on the appliance
1. Turn the power level rotary knob (3) to
the desired level.
2. Use the temperature control (2) to set
the desired temperature level.
Regulating the temperature controller
1. When the room has reached the desired
temperature, turn the temperature
control (2) anticlockwise until the
appliance is switched off and not
beyond. In this way, the set temperature
regulates itself automatically and is kept
at a constant level by the thermostat.
Never immerse the appliance or the
•
remote control in water for cleaning.
•
Do not use a steam cleaner for
cleaning.
•
The heater is equipped with a safety
device that switches off the heater in
case of unintentional overheating
(e.g. blockage of the air inlet and
outlet grilles, slow or no rotation of
the motor). To reset, disconnect the
appliance from the mains for a few
minutes, eliminate the cause of
overheating and reconnect the
appliance.
EN
Page | 13
Publicidad
