Uline H-10371 Instrucciones De Montaje página 4

7. Align L-brackets (G) with holes in desktop (1) and use
two M6 x 15 mm bolts (D) to secure each bracket.
Tighten using Phillips screwdriver. (See Figure 7)
NOTE: Install modesty panel on side closest to
large leg frame.
Figure 7
CREDENZA RETURN ASSEMBLY
1. Lock drawers of the low lateral file cabinet (13). With
second person, set file cabinet on side or back.
2. Insert M6 x 18 mm floor glides (L) on bottom of file
cabinet. Glides can be adjusted to compensate
for uneven floors. (See Figure 8)
Figure 8
PAGE 4 OF 23
ASSEMBLY CONTINUED
L
3. With second person, set file cabinet upright.
Unlock drawers. Using a Phillips screwdriver, remove
handle (J) mounted inside drawer and use same
screws (K) to attach handle to front of drawer.
Repeat for second drawer. Set cabinet aside.
(See Figure 9)
Figure 9
J
K
4. Start building bookcase portion by installing two
cam lock pins (Q) in bottom panel (9). Insert two
cam locks (R) into corresponding holes in skirt
panel (11). Fit bottom panel and skirt panel together
and turn cam lock clockwise until it locks.
(See Figure 10)
Figure 10
11
9
11
R
Q
9
1122 IH-10371