Caliber RMD 054DAB-BT Guia De Inicio Rapido página 2

DAB
ANTENNA INSTALLATION
Place the antenna on the windshield near the 'A post'
Remove the cover of the A-post
Attach to the metal of
the car frame.
Please note!
It's not necessary to
remove any paint!
Power the DAB Antenna with the
blue/white cable (12V Remote)
Make sure to strip the wires before connecting them.
Stick the transparant part of the
antenna on the windshield and put the black
part (magnetic) on the metal frame.
ISO connector
Male SMA
SPECIFICATIONS
FM TUNER
Frequency Range ---------------------------------------------------------------------------------- 87.5 ~ 108MHZ
Usable Sensitivity -------------------------------------------------------------------------------------------- 12 dBuV
Stereo Separation --------------------------------------------------------------------------------------------- >35 dB
DAB+ TUNER
Frequency Range ----------------------------------------------------------------------------------- 174 ~ 240MHz
Antenna type ---------- Screen mount / male SMA connector / active
Note: connect the antenna power supply wire to the remote/antenna wire (blue/white) of the head unit
ELECTRIC
Power Supply --------------------------------------------------------------------------------------- DC 11 ~ 15 Volt
Current Consumption ------------------------------------------------------------------------------- < 10 Ampere
Load Impedance ----------------------------------------------------------------------------------------- 4 to 8 Ohm
Dimensions ------------------------------------------------------------- 187mm (W) x 145mm (D) x 58mm (H)
Power Output ----------------------------------------------------------------------------------------- 4 x 75W (Max)
Line Output ------------------------------------------------------------------------------------------------------------ 1V
Transmission
Bluetooth Freq range: ---------------------------------------------------------------------------- 2402-2480 Mhz
Max e.r.p: ------------------------------------------------------------------------------------------ <100mW/20dBm
PLAYBACK
MP3, WMA, playback with ID3 Tag Display
We are continuously improving/updating our products and product information.
It's therefore possible that there is a slight difference between the description in this manual to the operation of the product.
If something is different or not clear; always check our website for the most current version.
(with separate 12V power supply wire)