Using The Vacuum; Recharging The Battery - Duronic VC24 Manual De Instrucciones

Using the Vacuum

To switch on the vacuum, press the On/Off button (a).
To adjust the speed, press the Speed button (b).
There are 3 speeds to choose from: low, medium and
high.
a b
To stop the vacuum, press the On/Off button (a).

Recharging the Battery

When the power/battery indicator flashes for seconds and turns off, this indicates
that the power has been used up.
To recharge the battery (13), plug the charging power adapter (18) into a plug
socked and then into battery pack. A green light will start to flash – this indicates
that the battery is charging. When the power indicator stops flashing and stays on
constantly instead, this means the battery is fully charged.
The battery on this vacuum can be charged in two ways:
On the wall mounted dock
13