Duronic VC24 Manual De Instrucciones página 14

Removing the battery to charge separately
1
Emptying the Dust Container
1. Remove the telescopic tube (7) and any attachments from the motor unit
body (20).
2. Holding the vacuum motor unit over a bin, press down on the Dust Container
Release button (11) to open the dust container (12). The lid will pop open and
the contents will be released into the bin.
3. Gently close the lid until it clicks into place.
4. Re-attach the telescopic tube back onto the motor unit.
Cleaning or Changing the Filter
Cleaning and changing the filters (19+20) will improve the performance of the
vacuum cleaner. In order to do so, please refer to the following steps:
1. Remove the dust container from the motor unit (5). Inside the dust container
you will find the HEPA filter inside the Mesh Filter. Remove both filters from
the dust container.
2. Gently tap out any dust from the filters into a bin.
3. Use the Cleaning Tool (17) to dust away any remaining build-up on the filters.
Recharging the Battery (continued)
2
Cleaning and Maintenance
3
14