Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE AND STORAGE
• It is recommended to clean the tool after each use.
• Do not use water or other fluids for cleaning.
• The tool should be cleaned with a dry piece of cloth or blown with
compressed air of low pressure.
• Do not use any cleaning agents or solvents, since they may damage
plastic parts.
• Venting slots in the motor housing should be cleaned on a regular
basis not to overload the tool.
• When the power cord is damaged, it should be replaced with the
power cord of the same parameters. It should be performed by a
qualified professional or the tool should be delivered to an authorised
service shop.
• When the commutator sparks excessively, have the condition of
motor carbon brushes checked by a qualified person.
• The tool should be always stored in a dry place and out of reach of
children.
REPLACING THE CARBON BRUSHES
Worn (shorter than 5 mm), burnt or cracked motor carbon brushes
should be immediately replaced. Both carbon brushes should be
always replaced at the same time.
Carbon brushes should be replaced by a qualified person using
original spare parts only.
All types of faults and defects should be eliminated by an authorised
service of the manufacturer.
SPECIFICATIONS
RATED DATA
Angle Grinder
Parameter
Power supply voltage
Power supply frequency
Rated power
Rated rotational speed
Max. grinding wheel diameter
Inner disc diameter
Spindle thread
Protection class
Weight
Year of manufacture
NOISE AND VIBRATION DATA
Information regarding noise and vibration
The following levels of emitted noise, such as emitted acoustic pressure
Lp
and acoustic power level Lw
A
have been given in the instruction manual as defined in the EN 60745
standard.
The following vibration value (acceleration value) a
uncertainty K have been determined as defined in the EN 60745
standard.
The vibration level provided in this instruction manual have been
determined according to the measurement procedure as defined in the
EN 60745 standard and can be used for comparison of power tools. This
can be used for preliminary assessment of exposure to vibrations.
The provided vibration level is representative for main applications of
the power tool. If the power tool is used for other applications or with
other working tools, and if it is not sufficiently maintained, the vibration
level may vary. The aforementioned reasons may increase the exposure
to vibrations during the entire operating period.
In order to precisely estimate the exposure to vibrations, periods should
be accounted for, in which the power tool is switched off, or when it is
switched on, but not operated. Thus, the total exposure to vibration may
prove considerably lower.
Additional safety measures should be taken to protect the user against
effects of vibrations, such as: maintenance of the power tool and its
working tools, ensuring proper temperature of the hands and proper
organisation of work.
Acoustic pressure level: Lp
= 85,97 dB(A) K= 3 dB(A)
A
Acoustic power level: Lw
= 96,97 dB(A) K= 3 dB(A)
A
Vibration acceleration value: a
= 7,319 m/s
h
Value
230 V AC
50 Hz
500 W
12000 min
-1
115 mm
22,2 mm
M14
II
1,64 kg
2021
and measurement uncertainty K
A
and measurement
h
K= 1.5 m/s
2
2
ENVIRONMENTAL PROTECTION
Electrically powered products should not be disposed of with household
wastes, but should be utilised in proper recycling centres. Obtain
information on waste recycling from your seller or local authorities.
Used electric and electronic equipment contains substances active in
the natural environment. Unrecycled equipment constitutes a potential
risk for the environment and human health.
* The right to make changes is reserved.
"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with
seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa Topex) informs, that all
copyrights to this instruction (hereinafter Instruction), including, but not limited to,
text, photographies, schemes, drawings and layout of the instruction, belong to Grupa
Topex exclusively and are protected by laws accordingly to Copyright and Related
Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz.
U. 2006 No 90 item 631 with later ammendments). Copying, processing, publishing,
modifications for commercial purposes of the entire Instruction or its parts without
written permission of Grupa Topex are strictly forbidden and may cause civil and legal
liability.
15
Publicidad
