EUROKRAFT W 300 Serie Instrucciones De Montaje página 8

GB
Assembly instructions
for platform truck series W 300
Your new platform truck is supplied with a removable bolt-on push handle to
reduce transport charges.
Assembly is quite simple; see sketch:
Insert the push handle (and side panels, if on order) with the angled upper part
facing outside into the recesses in the platform and fix them from beneath by the
bolts M 12 and washers enclosed.
Fix the traverse with the swivel castors to the chassis an the push handle side
with bolts M 12 and washers.
Fix the traverse with the fixed castors on the opposite of the chassis with bolts
M 12 and washers.
The correct spanner is enclosed.
Push handle
Chassis
Traverse with
Traverse with
swivel castors
fixed castors
Washer
Bolt M 12
Your new platform truck is ready to use.