Publicidad
Idiomas disponibles
Idiomas disponibles
Pressure gauge
17
Push handle
18
Filter dedusting lever
19
Suction turbine trigger 2
20
Suction turbine trigger 1
21
Suction head
22
Suction head lock
23
Filter vibrator
24
Sealing ring
25
filter
26
Mechanical switch-off
27
Suction hose port with wet separator
28
Venting valve
29
Filter foam
30
Micro-fleece
31
Strainer basket
32
Filling level hose
33
Ball tap
34
Symbols on the device
The device is suitable for vacuuming dusts
up to dust class M.
WARNING
Damage to the skin, lungs and eyes
Expulsion of fine dust during emptying and
maintenance work and disposal
Wear the prescribed personal protective
gear when performing during emptying and
maintenance work, including disposal of
the dust bag.
The device is suitable for vacuuming flam-
mable dusts, installation outside zone 22.
WARNING: This device must not be placed
in any zone 22. If a zone 22 is present, an
EX-device must be used.
The maximum vacuum value in relation to
the hose cross-section is specified on the
label. The actual value can be read on the
pressure gauge. For the values applicable
to this device, see chapter Reading the
minimum volumetric flow. If this value is not
reached, the filter must be replaced, (see
chapter Replacing the main filter). The var-
ious different hose cross-sections allow ad-
aptation to the various different connection
cross-sections of the accessories.
Micro-fleece
(Order no. 9.990-103.0)
Main filter
(Order no. 9.439-542.0)
Initial startup
WARNING
Potential equalisation line not connect-
ed correctly
Electric shock
Every time before use, check whether the
equipotential bonding conductor (earthing
conductors) are connected.
WARNING
Danger from dust that is harmful to your
health
Respiratory sicknesses through inhalation
of dust.
Do not vacuum without correctly installed
filter elements, otherwise a danger to
health from increased fine dust emission is
present.
WARNING
Improper handling when locking the dirt
receptacle
Risk of crushing
English
21
Publicidad
