Publicidad
Idiomas disponibles
Idiomas disponibles
1.- To turn the thermo-ventilator on at the required time
• The start timer lets you set the time when you want the thermo-ventilator
to come on: in 1, 2 and 3 hours' time, etc., up to 16 hours. The "0" means
that the thermo-ventilator is not programmed.
• Turn the switch (7) to the "on" position. Make sure that NO power has been
selected (pilot lights 2 and 3 must be off ) (Fig. 5). To do so, use button (5).
• Press the timer button (4). The pilot light (1) comes on and a "0" (Fig. 6) is
displayed on the screen. Press the buttons
indicates the number you want (Fig.7). In a few seconds, the room tem-
perature appears on the screen and the pilot light (1) stays on (Fig. 8).
• When the programmed time is reached, the thermo-ventilator automatically
turns itself on and the pilot light (1) goes off.
• If you wish to turn the programmer off before the selected time, press the
power selector button (5) (Fig. 9).
• If the room temperature is higher than the programmed temperature at the
selected time, the appliance will not come on.
2.- To turn the thermo-ventilator off at the required time
• The end timer will allow you to set the time when you want the thermo-
ventilator to go off: in 1, 2 and 3 hours' time, etc., up to 16 hours. The "0"
means that the thermo-ventilator is not programmed.
• Turn the switch (7) to the "on" position and select the desired power and
temperature.
• Press the timer button (4). The pilot light (1) comes on and a "0" (Fig. 6) is
displayed on the screen. Press the buttons
indicates the number you want (Fig.7). In a few seconds, the room tem-
perature appears on the screen and the pilot light (1) stays on (Fig. 8).
• When the programmed time is reached, the thermo-ventilator switches itself
off automatically and the pilot light (1) goes off.
• If you wish to turn the programmer off before the selected time, press the
power selector button (5) (Fig. 9).
• N.B. If the room temperature has reached the same or a higher temperature
than the one programmed before the set time, the appliance turns itself off.
CLEANING AND MAINTENANCE
• Before cleaning the appliance, make sure it is switched off and unplugged
from the mains.
• Clean the outside of the appliance with a dry cloth.
• Clean the inside of the appliance regularly, using a low-power vacuum
cleaner from the outside.
• We recommend you clean the appliance with a cloth after each period of
use and store it in its box in a dry place. When you go to use the appliance
again, make sure it is in a perfect state of repair.
(8) or
(9) until the screen
(8) or
(9) until the screen
11
Publicidad
