• ENGLISH
IMPORTANT
• Please read these instructions carefully before using the appliance.
• Before connecting the appliance, make sure the voltage shown on the
specifications plate is the same as the mains supply at your home.
• Remove all elements used for protection during transport or for sales promo-
tions, such as paper or plastic bags, plastic sheets, cardboard and stickers
from inside or outside the appliance.
• Do not place any objects on top of vents or openings since there is a dan-
ger of electrical shock.
• Keep your thermo-ventilator away from inflammable materials.
• Do not obstruct the air intakes and do not stand it on soft surfaces, such as
a bed.
• Do not place the thermo-ventilator directly below a mains socket.
• Do not use your thermo-ventilator if the wiring is damaged wiring or you
notice any other kind of fault. For safety reasons, take it to an authorised
technical service centre.
• Always make sure you turn off and unplug the appliance from the mains
when it is not in use.
• NEVER COVER the appliance, due to risk of FIRE.
• Do not place the cable under carpets or rugs, or any other kind of materi-
al.
• Do not place the cable on top of the appliance when the latter is hot.
• Do not use the appliance near a bath, shower or swimming pool.
• Do not stand the appliance near baths, showers or other types of containers
with water. If the thermo-ventilator falls into the water, DO NOT try to take
it out. Unplug it from the mains.
• Do not use the thermo-ventilator for drying clothes, and do not place fur-
niture at less than 50 cm from the front of the appliance, or in rooms with
2
less than 4m
of floor space.
• Keep the appliance out of the reach of children.
• The appliance is fitted with an OVERHEATING DISCONNECTION system. If a
problem occurs, this system automatically disconnects the appliance. If this
happens, please proceed as follows:
1) Unplug the appliance from the mains.
2) Leave it to cool for 15 minutes.
3) Clean the intake grille with a vacuum cleaner, if necessary.
If the appliance still fails to work as normal, please contact the technical
service.
9