Publicidad
Idiomas disponibles
Idiomas disponibles
Always lift pans off the ceramic hob – do not slide, or they may scratch the glass.
Using your Ceramic Hob
To start cooking
• After power on, the buzzer beeps once, all the indicators light up for 1 second
then go out, indicating that the ceramic hob has entered the state of standby
mode.
1. Touch the ON/OFF
show "-"
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. Touching the heating zone selection control ,and
a indicator next to the key will flash
4. Select a heat setting by touching the "-" or "+"
control.
• If you don't choose a heat setting within 1
minute, the Ceramic hob will automatically
switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time
during cooking.
control. all the indicators
11
Publicidad
