Aerian COSY1800 Manual De Instrucciones página 8

PRODUCT OVERVIEW
Realis c flame effect
OPERATION
The heater carries a symbol
the risk of overhea ng that exists if the heater is accidentally covered.
1. Place the heater on a stable flat surface.
2. Plug in the heater.
3. Set the power/flame switch to I (ON).
•The power and flame effect is turned on.
4. Set the heat ON/OFF switch to I (ON) to start hea ng.
5. Turn the thermostat knob clockwise to the "MAX" posi on.
6. When the desired room temperature has been reached, slowly turn
the thermostat knob an clockwise towards the "MIN" posi on.
7. To turn the heater off completely, press the heat ON/OFF switch
downwards.
8. To turn the flame effect off, set the power/flame switch to O (OFF),
and unplug the heater from the main socket.
CLEANING AND MAINTENANCE
• Before cleaning the heater, switch off and unplug it from the mains
socket. Allow it to completely cool.
• Wipe the exterior of the heater with a slightly damp cloth. Allow it to
At the rear of heater
Power / Flame switch
At the rear of heater
Air outlet
'DO NOT COVER' to alert the user to
EN5
Heat ON/OFF switch
Thermostat knob
Light bulb cover