Descargar Imprimir esta página

Adler europe AD 8078 Manual De Uso página 4

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 9
Control Panel
a – cool indicator
b – heat indicator
c - COLD/OFF/HOT switch
d – Mode switch
e – Connection socket for AC 220-240V~50/60Hz – wall outlet
f - Connection socket for DC 12V – car outlet
USING THE DEVICE
1.Clean the device before first use following the chapter Cleaning and Maintenance.
2. Place the device on a stable level surface. Open the cover (2) by first folding the handle (3) on the front of the device. Place food or beverage in the compartment (1). It is recommended to pack
food into bags or containers intended to be in touch with food before placing it inside the compartment (1).
NOTE: It is recommended to pre-cool the food for at least 4 hours to keep the food placed to the device cooled to desired temperature for as long as possible.
3.Connect 12V DC power plug to cigarette lighter socket or 12VDC outlet in your car. Make sure your car ignition is switched on to have power supply to cigarette lighter.
4.Close the lid (2) and secure it against accidental opening by turning the handle (3) backwards.
5.Turn the switch (c) up to cool food to position COLD or down to heat up the food to position HOT. According to the selected mode, cool indicator or heat indicator lights on. The device starts
cooling / heating.
WARNING: Before switch the device from cooling mode to heating mode and vice versa, the device must be switched off for 15 minutes at least!
6.Switch off the device by turning the switch (c) to position OFF.
7. Since the device is single-chamber, it is best to store food in plastic containers or resealable bags to prevent smells from "transferring" between different types of food, e.g. cake, cheese, onion,
etc.
To save power:
- place the device in a cool place to avoid influence of direct sunlight,
- keep lid closed and secured against accidental opening,
- clean the black gasket around the inside of the lid regularly.
Operation effectiveness:
1.Cooling:
- after set up the switch (d) at Position III – the temperature inside the compartment (1) drops about 15°C - 20°C lower, in outside temperature 25°C.
- after set up the switch (d) at Position II – the temperature inside the compartment (1) drops about 6°C - 10°C lower, in outside temperature 25°C.
- after set up the switch (d) at Position I, the device works at lowest power consumption.
2.Heating: this mode operate only when switch (d) is at position III.
- at Position III - the temperature inside the compartment (1) will reach temperature 55°C - 65°C.
CLEANING AND MAINTENANCE
1. Before cleaning unplug the power cable.
2. The cleaning process is restricted to using a damp cloth with a little of washing up liquid on the inside and outside of the devices body. Do not use rough sponges or hard brushes, papers, cloths
or towels as it may damage the device.
3. Do not submerge or wet the device.
Warning: DO NOT PUT ANY FOREIGN OBJECTS INTO THE VENTS TO TRY AND CLEAN THEM.
TECHNICAL DATA
Main power supply: Voltage 220-240V ~50/60Hz,
Car power supply: Voltage 12V DC,
Capacity: 28 liters
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the plastic container
Worn device should be returned to the appropriate point storage because it is dangerous in the device
ingredients may pose a threat to the environment. The electrical device should be handed over to limit
its reuse and use. If in the device there are batteries you have to take out and give to the point stored separately.
SORGFÄLTIG LESEN UND ZUM SPÄTEREN NACHSCHLAGEN AUFBEWAHREN
1. Lesen Sie vor der Verwendung des Geräts die Bedienungsanleitung und befolgen Sie die darin enthaltenen Anweisungen. Der
Hersteller haftet nicht für Schäden, die durch bestimmungswidrige Verwendung oder unsachgemäße Bedienung des Gerätes
entstehen.
2. Das Gerät ist nur für den nicht-kommerziellen Gebrauch bestimmt, die Ausrüstung ist zum Camping geeignet. Benutzen Sie es
nicht für andere Zwecke, die nicht seinem Verwendungszweck entsprechen.
3. Das Gerät sollte je nach Bedarf an den „Zigarettenanzünder"-Anschluss im Auto mit einer Spannung von 12 V oder an eine
Power input: Cooling mode: 55W / Heating mode: 50W
Power input: Cooling mode: 45W / Heating mode: 40W
DEUTSCH
ALLGEMEINE SICHERHEITSBESTIMMUNGEN
WICHTIGE SICHERHEITSANWEISUNGEN
Climate class: SN/N
4

Publicidad

loading