Caberg FULL FACE AVALON X Manual Del Usuario página 5

WARNINGS! Any adjustments to the sunshade visor must be done in still
position
4. HOW TO REMOVE THE WASHABLE LINING
To remove the inner padding you can start from either the right or left
side
4.1 Remove the cheek pad by pulling it inwards and detach the studs in
the back. Repeat the same step on the opposite side
4.2 Starting from the neck device, remove the lining by pulling
slightly towards the inside of the helmet until release the fixing
plastic frame in the rear D (Pic.5). Still pulling gently, release also the
fixing plastic frame in the front E (Pic.6).
4.3 Remove completely the lining.
5. HOW TO FIT THE WASHABLE LINING
5.1 Place the main liner padding inside the helmet.
5.2 Place the plastic frame in the front E and fix it to the seat attached to
the EPS liner (Pic.7).
5.3 Place the plastic frame in the rear D and fix it to the seat attached to
the EPS liner (Pic.8).
5.4 Adjust the cheek pads by placing the fixing strip F between shell and
EPS (Pic.9), then hook the buttons.
ENG
9