Caberg FULL FACE AVALON X Manual Del Usuario página 7

8. NOSE GUARD ASSEMBLY INSTRUCTIONS
8.1 Insert and press the nose guard into the centre position with the visor
raised, making sure that all the attachment points are properly aligned
with their respective slots on the helmet. (Fig.10)
9. NOSE GUARD REMOVAL INSTRUCTIONS
9.1 The nose guard is removed by pulling it upwards. (Fig.11)
STOP WIND
The wind deflector limits the inflow of cold air from below.
10. STOP WIND ASSEMBLY INSTRUCTIONS
10.1 Insert and press in the centre of the wind deflector fastening
frame between the edge of the shell and the chin guard. (Fig.12)
11. STOP WIND REMOVAL INSTRUCTIONS
11.1 The wind deflector is removed by pulling it upwards. (Fig. 13)
ENG
11