5
ALARM AND POSSIBLE FAULTS
Anomalies
The oven doesn't heat despite the
main switch is on (position 1) and
the temperatures are correctly set.
The function pilot lights of the
heating elements are off.
The analogical thermometer
doesn't notice the increase of the
temperature despite the heating
elements are correctly functioning
Inner light bulb does not switch on
Inner light bulb does not switch on
Inner light bulb does not switch on
The door is closed, but fume
comes out
The baking chamber does not heat
suitably
The baking chamber does not heat
suitably in spite of the temperature
being set rightly
The temperature continues going
up over the set by thermostats
WORKING ANOMALIES
Possible Causes
No electric Energy in the net
Analogical thermometer
Burned inner light bulb
Inner light bulb switch
No electric supply power on
the light bulb
Exhauster butterfly valve
The set temperature are too
One or more heating
elements are defected
Thermostat probe or
thermostat contacts defected
31
defect
defected
closed
low
Solutions
Check the
general
contactor, the
socket, the plug,
and the supply
cable.
Check and if
necessary
replace the
thermometer
Replace inner
light bulb
Replace light
bulb switch
Check electric
connection with
the light bulb
Open more the
valve and check
the right
functioning.
Set the right
temperature
Replace the
defecate heating
elements
Check and if
necessary
replace the
thermostat/s