Glamox H40 H Manual De Instalación página 10

GENERAL OVERVIEW OF THE THERMOSTAT DISPLAY
LIGHT INDICATORS:
1. Display showing temperature and control parameters.
2. The red light is on when the heater is opera ng.
3. Green light showing a reduced temperature. It is on
when the heater is opera ng in accordance with the
chosen program, maintaining the reduced temperature.
(See Addi onal func ons).
4. Green light indicator showing the "comfort"
temperature. It is on when the heater is opera ng in
accor dance with the chosen
"comfort" temperature. (See Addi onal func ons).
HOW TO OPERATE
The appliance is switched on or off by pressing the bu on
first me, it begins opera ng at the default "comfort" temperature of 22°C; meanwhile, the blinking screen will show that a clock
me has not yet been set (See Se ng menu). The heater will maintain the temperature displayed on the screen if the user does not
select the desired program from the Program menu. You can create your own weekly hea ng program (P1) or you can use the
exis ng standard programs "Office" (P2) or "Home" (P3). The weekly programs determine when it will maintain the comfort
temperature (22°C) and when it will maintain the reduced temperature, which saves energy (17°C).
SETTING MENU
By pressing and holding
use the bu on to select the necessary se ng or confirm
OK
Op ons
Se ng the me of the heater
td
Set the day of the week by pressing
Set the hour: 0-23 and save by pressing
You will not be able to adjust other se ngs un l you set the me and day of the week.
Adjustment of weekly hea ng program
Pr
P1 will no fy you that you are going to adjust the user program. Confirm this by pressing
adjust by using the
d3 – Wednesday, d4 – Thursday, d5 – Friday, d6 – Saturday, d7 – Sunday, and confirm your selec on by pressing
< and
temperature (green light above
return to the selec on list of the desired day for further programming or quit the se ng menu by pressing
If you wish to ini ate a weekly program, see chapter "Program menu". The last value used on the screen will be a ributed to
the "comfort" temperature before the start of the programming.
Adjustment of "comfort" temperature
Co
Select the desired comfort temperature by pressing
rd Se ng a lower temperature
Select the desired "reduced" temperature by pressing
OP Func on detec ng an open window
Select "On" or "oF" by pressing
The func on of an open window detects if a window is open (i.e., it detects a rapid change in temperature in a short period of
me). A er the heater detects an open window, the hea ng is automa cally turned off and changed to an -freezing mode by
maintaining a temperature of 7°C and „AF" is displayed. A er the window is closed, i.e., when the temperature in the area
increases, the heater automa cally turns the previous program on or maintains a permanent constant temperature.
Calibra on of the temperature
C
The ambient temperature is displayed on the screen. If it does not correspond to the thermometer readings, then it may be
calibrated. For example, the heater shows that the ambient temperature is 20°C; meanwhile, the other thermometer shows
that it is 22°C. Then you can calibrate it and set the temperature which you have measured using the other thermometer.
AS Adap ve start
Turn on ("On") or off ("oF") the adap ve start by using the
the user at a specific me. For example, if you want the temperature at 9 o'clock to be 22°C, the heater will determine when
it has to start hea ng so that it reaches 22°C at the desired me.
Reset the heater to factory default se ngs
rE
Press
OK
10
DT
program, maintaining the
bu on for 3 seconds, the selec on menu can be turned on or off. Use the
OK
+
< and < bu ons: 7d – 7 days, 5d – 5 business days, 2d – weekend, d1 – Monday, d2 – Tuesday,
< bu ons to change the hours from 00 to 23 and select the desired temperature for every hour:
< is on),
or
+
and a er the screen turns off, press and hold
SX.2
1
FUNCTIONS OF THE BUTTONS:
+ – Increases temperatur e, me or
other parameter.
-
– Decreases temperature, me or
other parameter.
on the right side of the heater. When the heater is switched on for the
your selec on:
Descrip on of func on
-
: 1 – Monday; 2 – Tuesday, etc., and save by pressing
. Set the minutes: 0-59 and save by pressing
OK
+ a "comfort" temperature (green light above
and - . By pressing
+
and - . By pressing
+
-
. This func on is turned off by default.
-
+ and
again un l you see "00" on the screen a er every shown segment.
OK
2 3
4
– Selec on bu on meaning
<
<
– Selec on bu on meaning "more".
OK – Confirma on of selec on.
< < bu ons to scroll through the list and
.
OK
.
OK
. Select which day(s) you are going to
OK
< is on). A er pressing
, you will enter the se ng menu.
OK
, you will enter the se ng menu.
OK
bu ons. This func on reaches the temperature set by
2021-02-24 art.no.:62045
"less".
. Use the
OK
-
a decreased
, you will
OK
for 3 seconds.
OK