Vertilux 6-800-MB-25B01 Manual De Programación página 4

Unidir ction ls.
unidir ction l motors.
Setting Bidirectional/Unidirectional mode on the remote
Please check if you have a bidirectional or unidirectional motor and set the remote
accordingly.
Only the following models can be compatible with bidirectional or unidirectional motors.
6-800-AT-CHB02, 6-800-AT-CHB06, 6-800-AT-ESBT6, 6-800-AT-ESB16
The following procedure activate or deactivate the bidirectional function on the
remote. When the bidirectional mode is activated, the icon
display and the remote can't be paired with unidirectional motors. Please note the
remote can be compatible with bidirectional or unidirecional motors but not with both
at the same time. Unidirectional and bidirectional motors can not be paired with the
same remote.
Remove the battery from the remote
1.
2. Press and hold the STOP button
3. Reinstall the battery
4.
Release the stop button
Remove the
battery
Pairing the Motor with the Remote
Select the desired channel on the remote and press the H button on the motor
head until the motor jogs*.
Press P button on the remote. The motor will jog twice.
(Repeat the same procedure to unpair the motor from the channel selected)
H button
*Make sure you are not in a group channel.
You are in a group channel when all the leds are light on or the display show the number 0 for models without display. For
models with display you are in a group channel when the icon
© 2023. Vertilux, Ltd. All Rights Reserved. Last revised: July 2023.
Th s mod ls r only comp tibl with
FAV
Button
6-800-AT-POU02
POINT 2CH LED
6-800-AT-POU06
POINT 6CH LED
Stop
PRESS & HOLD
Jog x1
T
Button
+
+
6-800-AT-POU16
POINT 16CH
Reinstall the
battery
Button
is shown on the display.
P
Button
AAA x2
+
+
will be shown on the
Stop
RELEASE
Motor Paired
Jog x2
03
vertilux.com