Vertilux 6-800-MB-25B01 Manual De Programación página 8

Sleep Mode OFF
Press and hold the H button on the motor head for 3 seconds until the motor jogs once, then
release it.
H button
When a group of motors are paired on a single channel, set the Sleep Mode ON to all motors except
the one that you would like to program or adjust the setting. Wake up all the motors once you finish
programming the motor that remained ''awake''.
Adding or deleting to a different Remote or Channel using
an already programmed Remote or Channel.
Remote/
Channel A
Jog x1
Button
Unpairing a Motor (s) from all Remotes
1.
2.
3.
Jog x1
Button
© 2023. Vertilux, Ltd. All Rights Reserved. Last revised: July 2023.
Jog x1
x3s
Remote/
Channel A
Jog x1
Button
Jog x1
Button
Motor is now "Awake"
Remote/
Channel B
Stop
Jog x1
Down
Jog x1
Remote or
Channel B is now
Added/Deleted
Motor(s) Unpaired
from all Remotes
07
vertilux.com