My Junior PICO2 Manual De Instrucciones página 7

EN
FR
ESP
1
Press the folding button (fi g. 1) and pull up on the handle to unfold the buggy un-
til you hear a click (fi g. 2). Make sure the buggy is locked in the fully open position
4
Align the safety bar with the openings facing the seat unit and insert the bar into
the openings provided until it audibly clicks into place.
Press the buttons located on the right and left side of the safety bar and pull it
Unfold & assemble
2 3
before using it (Fig. 3).
Safety bar
5
Attachment (Fig. 4):
Removal (Fig. 5):
out.
a
6
Press the brake lever down with your foot to brake (Fig. 6a). Lift the brake lever
with your foot to release the brake (Fig. 6b). Always use the brake as soon as
the buggy comes to a stop. Only use the brake when the buggy is at a complete
standstill and never while driving.
Adjust footrest
7
Press the buttons on both sides of the footrest
to adjust it (Fig. 7).
Note: To move the footrest upwards,
the buttons do not need to be pressed.
Break
b
Adjusting the canopy
8
Pull the canopy forward or push it back to
close or open the canopy (Fig. 8).
EN
ESP