Bosch GNH Professional 18V-63 Manual Original página 24

24 | English
Problem
The nails are driven in too deep.
The nails are not driven in deep enough. The battery is discharged or defective.
The power tool skips nails or has a cycle
feed that is too large.
Nails are frequently jamming in the shot
duct.
The driven nails are bent.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
1 609 92A 81N | (01.08.2022)
Cause
The fasteners being used are not ap-
proved.
The magazine (12) is empty.
The depth stop is set too deep.
The buffer is worn.
The fasteners are too long.
The depth stop is set too high.
The fasteners being used are not ap-
proved.
The spring of the magazine slider is too
weak or defective.
The fasteners being used are not ap-
proved.
The driver blade is damaged.
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The recommended lithium-ion batteries are subject to legis-
lation on the transport of dangerous goods. The user can
Corrective measures
– Use only original accessories. Only
the fasteners (nails, staples, etc.)
specified in the "Technical Data" table
may be used.
– Refill the magazine.(see "Loading the
magazine (see figures A1–A4)",
page 20)
– Adjust the depth stop to the required
depth.(see " Adjusting the depth stop
(see figure D)", page 22)
– Contact an authorised Bosch after-
sales service centre. Have the com-
ponent replaced there.
– Fully recharge the battery or replace
it.
– Use only original accessories. Only
the fasteners (nails, staples, etc.)
specified in the "Technical Data" table
may be used.
– Adjust the depth stop to the required
depth.(see " Adjusting the depth stop
(see figure D)", page 22)
– Use only original accessories. Only
the fasteners (nails, staples, etc.)
specified in the "Technical Data" table
may be used.
– Contact an authorised Bosch after-
sales service centre. Have the com-
ponent replaced there.
– Use only original accessories. Only
the fasteners (nails, staples, etc.)
specified in the "Technical Data" table
may be used.
– Contact an authorised Bosch after-
sales service centre.
– Contact an authorised Bosch after-
sales service centre. Have the com-
ponent replaced there.
Bosch Power Tools