Publicidad
Idiomas disponibles
Idiomas disponibles
6. SERVICE
NEVER service or adjust a tool. Servicing a tool may result in
personal injury.
7. GENERAL GUIDELINES
Disassembly should be done on a flat, clean surface. Some parts may fall free during disassembly. To prevent part
loss or damage, keep the tool as close to the working surface as possible.
Inspect all parts as they are disassembled and their mating parts in the tool that are not removed for signs of
damage, wear, cracks, etc. Replace any parts which appear to be damaged.
When disassembling the tool for service, it is recommended that O-rings, back-up rings and gaskets be replaced.
Clean grease and oil from all parts (taking care to protect your eyes), then dry thoroughly. Do not expose O-rings or
other packing components to cleaning agents for long periods of time.
Inspect all parts as they are assembled for signs of damage, wear, cracks, etc. Do not install any parts which
appear to be damaged.
8. TECHNICAL FEATURES
MD6 Technical features
Strength
Length
Weight
9. GUARANTEE
The MD6, MD66, MD68 and MD66GE1 tools are guaranteed free of defects in material and workmanship for a period of
one (1) year from the date of purchase. Any defects that show up within one year will be repaired or replaced free of
charge. As long as the tool has been used accordingly to the instructions of the supplier. After one year the units will be
repaired in the factory and billed to the customer.
Together with the unit for repair, a repair order and a short description of the failure is required. AII MD6, MD66, MD68 and
MD66GE1 tools re-constructed in the factory carry a new guarantee of six (6) months as from the date of leaving the
factory.
WARNING
Terminals/Splices
40 kN
Tubular Terminals and splices
YAV – YSV – YSM – YCA -
645 mm
YCS
2.7 kg
Soldered terminals BY
Tap Connectors
Cu / Al
Circumferential
terminal of Al
Service information is provided only for experienced tool
technicians. We do not recommend that you attempt to
service or repair any tool yourself. Tool servicing by
unqualified personnel will void the warranty and may lead
to serious personal injury.
Crimping
crimping
8
2
Section (mm
)
10 – 95 / 10 – 120 / 6 – 95
6 – 95 / 10 – 120
Cu / Al
10 - 95
Publicidad
