Descargar Imprimir esta página

FONDUSSIMO FD2330 Manual De Instrucciones página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

• Allow the product to fully cool off before cleaning it.
• Never carry the product when it is hot or contains hot liquids.
• Always allow the product to cool off before touching the ring.
• Do not use steel wool, metal knives or other objects that could damage
the fondue pot's non-stick coating.
• Never submerge the product in water or any other liquid to avoid
electrocution risks.
• Never dip the power cable in water to avoid electrocution risks.
• Unplug the power cable after every use.
• When using, limit traffic near the electrical cord to prevent any risk of injury.
• This product is equipped with a power cable with a 3-pin plug.
• If you need a power cord extension, make sure it has 3 conductors to avoid
all risks of injuries.
• The tension of the wall outlet must correspond to the products' specifications,
such as 110-120V, and must have three openings to be put to the floor.
• Keep the power cable away from heat sources to avoid damaging it.
• Only use the temperature regulation probe provided with the set.
• Never use Fondussimo product components on another product, and vice-versa.
• Always store away the product on its' legs and in a safe, dry environment.
• Do not put the baskets at the bottom of the bowl for storage, in order to protect
the non-stick coating.
• Ideally, you should place the product in its original packaging.
• If the product is damaged, it must be replaced by the manufacturer and notify
Fondussimo's Customer Service department.
• Do not use the damaged product until it has been fixed.
• The modification or the dismantlement of the product affects its safety and
may cause harm to the product users.
• The manufacturer waivers all responsibility in the case of material, physical
or moral damage due to an inappropriate use or disrespect of safety instructions.
• No guarantee will be applied in the event of product misuse.
USER'S MANUAL
5

Publicidad

loading