Publicidad
Idiomas disponibles
Idiomas disponibles
How to Use
EN
Function introduction of Display Screen
Battery Percentage
Electronic Lock/Reset Filter
• Press briefl y to enter/exit the lock status
• Press and hold for 1.5 seconds to enter the fi lter reset interface
Switching Suction Level/Setting Language
• Click to switch between Eco Mode, Auto Mode, Med Mode, and Turbo Mode
• Press and hold for 3 seconds to enter the language setting interface
Note: If you need to pay attention to any abnormality during the use of the product, a
prompt will appear on the screen. You should follow the instructions on the screen to keep
the performance normal.
Setting Language
Press
and hold for 3 seconds to enter the language selection interface
Click
to scroll through the language list, select a language
And then press
Note:
• If there is no operation for more than 15 seconds, the display will be turn off .
• When the smart multi-brush bar is attached, the vacuum will automatically switch the
suction level between the fl oor/tile and the carpet.
• Stop the vacuum at any time while cleaning. It will continue to use the last selected
suction level when starting again.
10
and hold for 3 seconds to save your setting
Suction Level Status
Publicidad
