Toyotomi Zibro LC-140 Instrucciones De Uso página 20

All manuals and user guides at all-guides.com
The settings for program 1 for Monday are programmed and
the display shows SET for 3 seconds.
After 3 seconds choose another day or end the setting mode
by pressing timer.
Press the "timer" key to exit the weekly timer setting mode and return to the time and a
day of the week display. Timer lamp turns off.
COPYING THE SETTING FROM ONE DAY TO ANOTHER
Use the copy function if there are multiple days during one week which should have the
same setting times.
Make sure that the heater is not burning. Press the timer key
. Use the adjustment keys until the day of its source is
displayed in the display.
Press extension/day/set to select.
The display shows:
Use the adjustment keys or to choose copy. Press
extension/day/set to select the copy function.
Use the adjustment keys or to select the day to which
the settings should be copied. Press extension/day/set to
choose the selected day.
The settings for program for Tuesday are programmed and
the display shows SET for 3 seconds.
After 3 seconds choose another day to copy or end the
setting mode by pressing timer.
OPERATING THE WEEKLY TIMER
Switch on the heater by pressing the POWER button ¹. And then press the timer-key
immediately after that. The Timer light will light up and the heater shuts off. The On / Off
indicators on the display shows whether the appliance is switched on or off.
When the appliance is switched off by the timer, the off
indicator is visible. The display shows the -actual time.
When the appliance is switched on by the timer, the on
indicator is visible. The display shows the desired (set) and
actual (room) temperature.
4
8