Panasonic TY-42TM6MA Manual De Instrucciones página 15

Troubleshooting Guide
Before reguesting service, make the following checks.
Symptoms
VIDEO
Snowy Video
Multiple Image
Interference
Normal Video
No Video with Snow
No Video / No PIP
No Color
Normal Video
Black Box on Screen
Normal Video
Intermittent Remote Control Operation
Specifications
Model No.
Channel Capability-181
Connection Terminals
Model No.
Mass (weight)
Operating range
AUDIO
Noisy Audio
Noisy Audio
Noisy Audio
No Audio
Noisy Audio
No Audio
Normal Audio
Wrong Audio
Normal Audio
Normal Audio
U/V Tuner Board with MATE I/F
TY-42TM6MA
VHF-12 : UHF-56 : Cable-125
AV INPUT VIDEO (RCA PIN JACK TYPE)
S VIDEO (Mini DIN 4-pin)
AUDIO L-R (RCA PIN JACK TYPE) 0.5 Vrms
AV OUTPUT VIDEO (RCA PIN JACK TYPE)
∗
Cannot output UHF/VHF signals.
AUDIO L-R (M3 JACK TYPE) 0.5 Vrms
Digital interface port (MATE) RJ-11C
Remote control
N2QAFB000003
approx. 160 g (5.6 oz)(including batteries)
approx. 7 m (23 feet) directly in front of the unit
Solutions
Adjust Antenna Location and Connection.
Adjust Antenna Location and Connection.
Check Antenna Lead-in Wire.
Move television away from Electrical Appliances, Lights,
Vehicles and Medical Equipment.
Increase Volume.
Check Mute.
Change Channel.
Set TV or Cable Mode Properly.
Check Antenna Cables.
Check Power Cord is Plugged into Active Outlet.
Adjust Brightness and Audio Controls.
Change Channel.
Check Cable Connections.
Check Second Video Source Operation.
Adjust Color Settings.
Change Channel.
Check Audio is set to stereo or Mono, not to SAP.
Change CC (Closed Captioning).
Replace Remote Control Batteries.
1.0 Vp-p (75 Ω)
Y : 1.0 Vp-p (75 Ω), C : 0.286 Vp-p (75 Ω)
1.0 Vp-p (75 Ω)
15