Descargar Imprimir esta página

Pic Solution AirCube Instrucciones De Uso página 9

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 21
Manufacturer's guide and declaration – Electromagnetic Immunity
s
d
Conducted disturbances,
induced by radio-frequency
fields IEC 61000-4-6
Radiated radio-frequency IEC
61000-4-3
ial
NOTE 1 - At 80 MHz and 800 MHz, the distance for the highest frequency range is to be applied.
NOTE 2 - These guidelines may not cover all situations. Electromagnetic radiation is affected by absorption and reflection by
structures, objects and people.
a)
The field intensities for fixed transmitters like base stations for radio telephones (cellular and cordless) and terrestrial mobile radios,
HAM radio devices, AM and FM radio transmitters and TV transmitters can not be theoretically foreseen accurately. In order to
assess an electromagnetic environment caused by fixed RF transmitters an electromagnetic study of the site must be considered.
If the field intensity measured in the location where the AirCube
conformity above the normal operation of the AirCube
performance is noted additional measures may required such as different orientation or positioning of the AirCube
000 200.
The field intensity in 150 kHz to 80 MHz frequency range must be less than [V
b
3 V eff from 150 kHz to 80 MHz
3 V/m from 80 MHz to 2.5 GHz
02 038206 000 200 must be placed under observation. If abnormal
9
V
=3 V eff from 150 kHz to
1
80 MHz
E
= 3 V/m from 80 MHz to
1
2.5 GHz
02 038206 000 200 is used exceeds the applicable level of
] V/m.
1
Portable and mobile RF com-
munication devices must not
be used closer to any part of
the AirCube
02 038206
000 200, including the
cables, than the separation
distance calculated by the
equation applicable to the
transmitter frequency.
Recommended separation
distances
d = [3.5 / V
]
P
1
d = [3.5 / E
]
P from 80
1
MHz to 800MHz
d = [7 / E
]
P from 800
1
MHz to 2.5 GHz
Where P is the maximum
rated output
power of the transmitter in
Watts (W) according to the
transmitter manufacturer
and d is the recommended
separation distance in
metres (m). The intensities
of the fields from fixed RF
transmitters, as determined
in an electromagnetic study
of the site
,
a)
may be less than the
level of conformity of each
frequency interval
.
b)
Interference may occur
near devices marked by the
following symbol:
02 038206

Publicidad

loading

Este manual también es adecuado para:

02 038206 000 200