Jackery Explorer 300 Plus Manual Del Usuario página 7

LED Light On/O
There are three modes of LED Light: Light mode, and SOS mode.
The operations are as follows: Press the LED Light Button, the LED will be turned on. The light will always
turn on in Low Light mode and the output power on the screen is 1W. Press again to enter the SOS
mode and the output power on the screen is 1W. Then, press again to turn o the LED Light. In any of
these modes, the light can be turned o by a long press.
APP CONNECTION
This product supports the connection of Jackery App for intelligent control and operation. Users can
download the Jackery App through App Store or Google Play. Please refer to the User Manual for
Jackery App for detailed connection instructions.
CHARGING YOUR JACKERY EXPLORER 300 PLUS
Green energy first: We advocate to use the green energy first. This product supports two modes of
charging at the same time: solar charging and AC wall charging.
When AC wall charging and solar charging are turned on at the same time, the product will give priority
to solar charging and both methods will be used to charge the battery at the maximum permissible
power.
Charging from the wall
Please use the AC cable included in the package.
Solar energy charging
Jackery SolarSaga 100 or 60 Solar Panel Connection Guide
The Solar Generator 300 Plus is different from other Jackery Solar Genrator. For the first time, it adopts
USB-C input as the solar charging input. You can refer to the following connection scheme to charge
your Explorer 300 Plus.
DC7909 to USB-C Adaptor
SolarSaga 100
AC Charger
DC7909 male
DC7909 to DC8020 Adaptor
Explorer 300 Plus
5
Explorer 300 Plus
USB-C input port
US
05