SoundLogic 80423 Manual página 3

EN
Thank you for purchasing our Wireless charger.
This manual will provide instructions for effective
and safe use of the product. Please read it
carefully before use and store the manual in a
safe place for future reference. If you ever pass
the product on to others, this manual should be
included.
1. Safety instructions
• For intended use only, as described in this
manual.
• Before use, inspect the device and its parts. Do
not use in case of damage.
• Do not place, store or use the product near
water.
• Do not place near heat sources such as
radiators, cookers, etc.
• Remove magnetic mounts, metal covers or
objects with magnetic strips or RFID chips
before use.
• Do not place foreign objects on the product.
• Place the product on a solid level surface.
• Do not attempt to repair, disassemble or alter
the product yourself.
• Handle with care.
2. Package content
- Wireless charger
- USB-C charging cable
- Manual
3. Description of parts
1. Wireless charging pad
2. USB-C charging port
3. LED indicator light
4. Operation
1. Connect the wireless charger directly to a
power source with the provided charging
cable, or to the mains using a suitable adapter
(not included).
2. Place your Qi-compatible smart phone in
the centre of the wireless charger. The LED
indicator light shows the charging status.
Note: Only phone cases thinner than 5 mm are
suitable for wireless charging.
Charging status
LED Status
Red connected to power
Blue successfully charging
Off not connected to power
5. Maintenance
- Always unplug before long-term storage.
- If necessary, clean the outside of the product
with a slightly damp cloth. Do not let moisture
come into contact with any electrical parts. Dry
thoroughly with a clean and soft cloth.
- Store it in a dry, cool place away from direct
sunlight.
6. Technical specifications
Material
Input
Wireless output
Operation frequency
Charge efficiency
Maximum radio-frequency
power
Max. radiated power (EIRP)
Operating temperature
Coil
Dimensions
7. Disposal
Dispose of the article and the packaging materials
in accordance with current local regulations.
The crossed out wheelie bin symbol means
that this product shall not be disposed of
with normal household waste. Electronic
and Electrical Equipment not included in the
selective sorting process are potentially
dangerous for the environment and human health
due to the presence of hazardous substances.
Please dispose of responsibly at an approved
waste or recycling facility.
The CE marking is a certification mark that
indicates conformity with health, safety
and environmental protection standards for
products sold within the European Union. The CE
marking is the manufacturer's declaration that
the product meets the requirements of the
applicable EC directives.
Recycling helps to reduce the consumption
of resources and reduce the environmental
impact. If you wish to discard the packaging,
comply to the environmental legislation in your
country.
8. Simplified Declaration of Conformity
Hereby, Remalux B.V. declares that item number:
80423, Wireless charger, is in compliance with the
RED Directive 2014/53/EU. The full text of the EU
DoC is available at the following internet address:
https://soundlogic.eu/declaration-of-conformity/
ABS + Al
5V 2A
9V 2A
5W 5V 1A
10W 9V 1.1A
108-159kHz
73%
89, 19dBuV/m
at 205kHz
± 4.36 dB
≤ 65°C
1 piece, Ø 45 mm
101 x 7.0 mm
3