Bosch 0 611 272 100 Manual Original página 13

OBJ_BUCH-861-007.book Page 13 Thursday, April 28, 2016 1:35 PM
and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or
may cause an electric shock.
 When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
 Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or
less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Machines with electronic control and right/left ro-
tation are also suitable for screwdriving.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 SDS-plus tool holder
2 Dust protection cap
3 Locking sleeve
4 Rotational direction switch
5 Lock-on button for On/Off switch
6 On/Off switch
7 Handle (insulated gripping surface)
8 Release button for mode selector switch
9 Mode selector switch
10 Button for depth stop adjustment
11 Depth stop
Bosch Power Tools
12 Auxiliary handle (insulated gripping surface)
13 Securing screw for key type drill chuck*
14 Key type drill chuck*
15 SDS-plus adapter shank for drill chuck*
16 Extraction sleeve of the dust extraction attachment*
17 Clamping screw for the dust extraction attachment*
18 Depth stop of the dust extraction attachment*
19 Telescopic pipe of the dust extraction attachment*
20 Wing bolt of the dust extraction attachment*
21 Guide pipe of the dust extraction attachment*
22 Universal bit holder with SDS-plus shank*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Rotary Hammer
Article number
Speed control
Stop rotation
Right/left rotation
Rated power input
Impact rate
Impact energy per stroke
according to
EPTA-Procedure 05/2009
Speed
Tool holder
Spindle collar diameter
Drilling diameter, max.:
– Concrete
– Brickwork (with core bit)
– Steel
– Wood
Weight according to
EPTA-Procedure 01:2014
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Sound emission values determined according to
EN60745-2-6.
Typically the A-weighted noise levels of the product are:
Sound pressure level 91 dB(A); Sound power level
102 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-6:
Hammer drilling into concrete: a =17.5 m/s
h
2
Chiselling: a =14 m/s , K=1.5 m/s
h
2
Drilling into metal: a <2.5 m/s , K=1.5 m/s
h
Screwdriving without impact: a <2.5 m/s
h
English | 13
GBH 2400
0 611 253 8..



W 720
-1
min 0–4000
J 2.7
-1
min 0–900
SDS-plus
mm 50
mm 24
mm 68
mm 13
mm 30
kg 2.7
/II
2 2
, K=1.5 m/s
2
2
2 2
, K=1.5 m/s
1 609 92A 2A6 | (28.4.16)