To install the door
WARNING
w
• To avoid damage to the dryer or the door, support the
door with a stool or box that fits under the door, or have
an assistant support the weight of the door.
• Always reverse the door BEFORE stacking the dryer on top
of the washer.
• Avoid dropping the door to avoid damage to the door or
the floor.
THE DRYER DOOR IS VERY LARGE AND HEAVY. Failure to follow
the instructions below can result in damage to the dryer,
property damage or injury to persons.
1. Move door to left side and insert a hinge to hinge hole.
2. Hold on hinge while screw down a hinge
(to prevent door dropping).
Hinge Screw
3. Insert latch to right side and install screws.
4. Screw down four dummy screws right side.
5. Check that the door closes and latches properly.
Hinge hole
Latch
Screw
INStALLAtION INStRUCtIONS
Hinge
Dummy
Screw
Swing Door
17