L'élimination de cet article est régie par la directive européenne 2012/19/UE relative aux Déchets d'Équipements Electriques et Electroniques
(DEEE). Selon cette norme, le consommateur se voit interdire d'éliminer cet article en tant que déchet urbain. Il DOIT être éliminé par
les canaux de la collecte sélective (DEEE). Ce symbole indique le devoir du consommateur d'éliminer cet article en tant que DEEE et
NON comme déchet urbain. Adressez-vous aux autorités locales ou à votre revendeur pour obtenir des conseils sur le recyclage. Merci
de recycler l'emballage dans les points de collecte prévus à cet effet. L'élimination abusive du produit par le consommateur implique
l'application des sanctions administratives prévues par la loi.
Thank you for purchasing one of our products. We recommend you carefully read this instruction manual: it contains important
information regarding safety regulations for use and maintenance of the appliance. It is also recommended to keep this document
carefully to consult in case of necessity.
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without supervision.
CAUTION: Keep the tool away from flammable materials (curtains,
combustible material, furniture, etc.). To use this appliance in total safety
implies observing some basic safety measures, such as: never use the
appliance with wet hands or feet, never expose the appliance to moisture
or water, never leave the appliance exposed to atmospheric agents, never
disconnect the plug by pulling the power cord or the appliance itself. After
finishing the work, turn off the product and leave the soldering iron cool
in the air; never put it under water in order to avoid electric shocks. Do not
touch metal parts of the soldering iron (tips or resistances) when it is on,
with your hands or other parts of the body. High temperatures can cause
severe burns. This tool can set fire to different materials, make a proof on
a discarded material before use.
If the power cord is damaged, it must be replaced by the manufacturer or
the manufacturer's technical support service, or by an adequately qualified
technician so as to prevent any risks. The power cord must never be in
contact with the hot surfaces of the soldering iron. This tool is not a toy.
Before using the tool, control its integrity, if there are any defective parts, or it has other conditions, which could
negatively influence its functions and safety. Remove all the packaging material and make sure that the appliance is in
good condition. If you have any doubt, do not use the appliance and contact our After-Sales Service. Keep the
packaging material (staples, nylon bags, etc.) out of the reach of children. Before plugging the soldering iron into a
socket, check whether your voltage corresponds to the rating label of the appliance. This appliance must be connected
to an approved mains socket that complies with the safety regulations on electrical systems for civil purposes. The
electrical system must be specific for the appliance rated voltage. Never cover the appliance, as this could cause risk
of overheating. Do not leave the soldering iron on, if you do not use it; it causes an early oxidation reaching over-
temperatures which could compromise the duration of the resistances.
The appliance must be used only for its intended use, that is soldering iron. Any other use than its intended purpose
shall be deemed to be improper and hazardous. The manufacturer shall not be held responsible for damages derived
from misuse of this appliance.
Always unplug the appliance before performing any maintenance and whether it is not used for long periods of time.
Before inserting or removing the tips, unplug the appliance. Never connect the power cord to extensions or triple
plugs. Do not pull or damage the power cord
DT ISTR (1740PRO) 02/2012_REV 6 23/02/2017
PROTECTION DE L'ENVIRONNEMENT
SAFETY WARNINGS
GENERAL WARNINGS
5/24