IN THE BOX
a) 1x Screen
b) 2x Wall and ceiling
c) 8x Screw for wall and
d) 1x Hexagon socket key
mounting bracket
ceiling mounting brackets
e) 2x Remote control (1x
f) 2x battery
g) 1x Trigger cable
h) 1x IR receiver
infrared, 1x radio)
i) 8x Plastic dowels
j) Operating instructions
k) Eyelets for hanging
l) 2x RJ12 plug
m) 4x Screws for eyelets
n) Radio trigger
o) Adapter for radio trigger
INSTALLATION NOTE
Install the screen in a position that is fully visible to all viewers! The optimum
installation height corresponds to the position of the viewers in the centre of
the screen with the screen fabric extended: eye level = lower third of the screen
surface.Install the screen straight and level, otherwise there is a danger that the
screen fabric will be wound up and unwound crookedly. The enclosed moun-
ting material is intended for a solid stone wall. If necessary, obtain suitable
mounting material for your installation surface.
With this screen you have the option of choosing between three mounting va-
riants. As a general rule, the mounting brackets (b) should ideally be between
200 and 300 mm from both ends of the screen (see fig. 1).
200-300
200-300
Abb. 1
4