Manual Settings; Care And Maintenance; Battery Replacement; Troubleshooting - TFA 60.4513 Instrucciones De Uso

TFA_No. 60.4513_Anleitung_05_16 09.06.2016
Radio-controlled bathroom clock
8. Operation
• The device will automatically quit the setting mode if no button is pressed for a long period of time.
• Press and hold the ▲ or ▼ button in the setting mode for fast running.
• The buttons are underneath the housing cover.

8.1 Manual settings

• Press and hold the EINSTELLEN button in normal mode. The 24Hr digit will be flashing. Press the ▲ or ▼ button to
choose 12 HR or 24 HR system. In the 12 HR system AM or PM (after 12 o'clock) appears on the display.
• Press again the EINSTELLEN button to make the settings in the following sequence: Time zone (00 default), the
hours, the minutes, the year, the month, the day and the day-of-week language (GE default). Press the ▲ or ▼ but-
ton to adjust it.
• Confirm with the EINSTELLEN button.
• The manually set time will be overwritten by the DCF time when the signal is received successfully.
8.1.2 Setting of the time zone
• In the setting mode you can make the time zone correction (-12/+12).
• The time zone correction is needed for countries where the DCF signal can be received but the time zone is differ-
ent from the German time (e.g. +1=one hour later).
• 00 appears on the display.
• Press the ▲ or ▼ button.
• Confirm the setting with the EINSTELLEN button.
8.1.3 Setting of the day-of-week language
• In the setting mode choose the day-of-the-week language:
German (GE), English (EN), Italian (IT), French (FR), Dutch (DU), Spanish (SP) and Danish (DA).
9. Positioning and fixing
• Place the device with the removable leg onto any flat surface or wall mount the device with a nail at the respective
location using the wall mounting hole.
• The sucker can be used on flat surfaces only. Please do not detach by pulling at the housing. Remove the suckers
carefully with your fingers.
• Attention: Due to high humidity, it may be that the suckers will lose their hold.

10. Care and maintenance

• Clean the instrument with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the battery if you do not use the device for a long period of time.
• Keep the device in a dry place.

10.1 Battery replacement

• Change the battery when the functions of the device becomes weak.

11. Troubleshooting

Problems Solution
➜
No indication on the device
➜
➜
No DCF reception
➜
➜
➜
➜
➜
➜
Incorrect indication
➜
If your device fails to work despite these measures contact the supplier from whom you purchased it.
10
11:00 Uhr Seite 6
Ensure that the battery polarity is correct
Change the battery
Press the FUNK/SIGNAL button and start the initialization manually
Wait for attempted reception during the night
Choose another place for your product
Manual setting of the clock
Check if there is any source of interference.
Restart the device according to the manual
Use a pin to press the NEUSTART button
Change the battery
Radio-controlled bathroom clock
12. Waste disposal
This product has been manufactured using high-grade materials and components which can be recycled and reused.
Never dispose of empty batteries and rechargeable batteries in household waste.
As a consumer, you are legally required to take them to your retail store or to an appropriate collection
site depending on national or local regulations in order to protect the environment.
The symbols for the heavy metals contained are: Cd=cadmium, Hg = mercury, Pb=lead
This instrument is labelled in accordance with the EU Waste Electrical and Electronic Equipment Directive
(WEEE).
Please do not dispose of this instrument in household waste. The user is obligated to take end-of-life devices
to a designated collection point for the disposal of electrical and electronic equipment, in order to ensure
environmentally-compatible disposal.
13. Specifications
Temperature measuring range: -10°C...50°C
Power consumption: Battery 1 x 1,5 V AA (not included)
Housing dimension: Ø 170 x 60 (86) mm
Weight: 380 g (instrument only)
No part of this manual may be reproduced without written consent of TFA Dostmann. The technical data are correct at the time of going
to print and may change without prior notice.
The latest technical data and information about your product can be found by entering your product number on our homepage.
EU declaration of conformity
Hereby, TFA Dostmann declares that the radio equipment type 60.4513 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
www.tfa-dostmann.de
E-Mail: info@tfa-dostmann.de
TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, D-97877 Wertheim 05/16
11