Assembly; How To Operate Your Hand Vac - Regina CP-HC01 Serie Manual De Instrucciones

Assembly

NOTE: Dust cup filter must be used when operating the hand vac.
1. To open the dust cup, first circumgyrate the dust cup in the
direction of the arrow as shown and then pull dust cup
away from cleaner. Verify that the dust cup filter is inside,
then reattach the dust cup to the hand vac.
2. To attach the cleaning brush or crevice brush to the hand
vac, push brush into the suction hole, as shown.
3. To use the flexible hose, push the end of the hose into the suction hole, then attach the desired
brush to the other end of the flexible hose, as shown. Only one end of the hose fits into the hand
vac.
4. To use the carrying strap attach the strap to the connection on the hand vac.

How to operate your hand vac

CAUTION: The hand vac is a very powerful unit. Make sure that you hold it firmly, otherwise it
can slip out of your hand and cause injury.
CAUTION: Always unplug from electrical outlet before opening the dust cup.
NOTE: Dust cup filter must be used when operating the hand vac.
1. Hold the hand vac firmly with your hand on handle.
2. Push the On (-) Off (0) power switch to "On (-)" position.
3. Start vacuuming.
3
t