Changing And Cleaning The Dust Cup Filter; Troubleshooting Guide - Regina CP-HC01 Serie Manual De Instrucciones

Changing and cleaning the dust cup filter

CAUTION: Always unplug from electrical outlet before opening the dust cup.
1. To open the dust cup, circumgyrate the dust cup and pull off the dust cup.
2. Empty the dust from the dust cup and shake filters
3. Occasionally rinse the dust cup filter in cold water. Then wait until they dry completely before
replacing them onto the hand vac.
4. Attach the dust cup to the hand vac.
CAUTION: Adequate airflow must be maintained at all times through the cleaner.
Any obstructions will cause the motor to overheat resulting in permanent damage.
Trouble Shooting Guide
PROBLEM
Hand vac cannot
operate.
Hand vac cannot
pickup or suction
power is weak.
Dust escaping
from hand vac.
Hand vac hose or
brushes cannot
pickup.
POSSIBLE REASON
1. Power cord not
plugged into outlet.
2. No power in wall outlet.
1. Dust cup is full.
2. Unit clogged.
3. Dust cup filter
cleaning.
1. Dust cup filter
cleaning.
2. Dust cup filter
installed correctly.
3. Puncture/hole in dust cup
filter.
1. Hose clogged.
2. Dust cup is full.
POSSIBLE SOLUTION
firmly 1. Plug unit in firmly
2. Check fuse or breaker. Replace
fuse / reset breaker.
1. Empty dust cup.
2. Turn unit off and unplug from wall
needs outlet and check for object(s)
causing clog and remove.
3. Clean or replace the dust cup
filter.
needs 1. Empty dust cup and clean filter.
2. Review dust cup filter instructions.
is not 3. Replace dust cup filter.
1. Remove hose and/or brushes.
Remove obstruction from hose.
2. Empty and clean dust cup and
clean dust cup filter.
4
t