Descargar Imprimir esta página

Sony ILX-LR1 Guía De Inicio página 8

Ocultar thumbs Ver también para ILX-LR1:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 34
How to turn off wireless network
functions (Wi-Fi, etc.) temporarily
When you board an airplane,
etc., you can turn off all wireless
network functions temporarily using
[Airplane Mode].
For Customers in the
U.S.A. and Canada
This equipment complies with FCC
radiation exposure limits set forth
for an uncontrolled environment and
meets the FCC radio frequency (RF)
Exposure Guidelines. This equipment
should be installed and operated
keeping the radiator at least 20 cm or
more away from person's body.
This equipment complies with ISED
radiation exposure limits set forth
for an uncontrolled environment
and meets RSS-102 of the ISED radio
frequency (RF) Exposure rules. This
equipment should be installed and
operated keeping the radiator at least
20 cm or more away from person's
body.
For Customers in the
U.S.A.
For question regarding your product
or for the Sony Service Center nearest
you, call 1-800-222-SONY (7669) .
Supplier's Declaration of Conformity
Trade Name : SONY
Model : WW559681
Responsible Party : Sony Electronics
Inc.
Address : 16535 Via Esprillo, San
Diego, CA 92127 U.S.A.
Telephone Number : 858-942-2230
EN
8
Important note on use of 5 GHz
wireless LAN
Compliance with FCC requirement
15.407(c)
Data transmission is always initiated
by software, which is the passed
down through the MAC, through the
digital and analog baseband, and
finally to the RF chip. Several special
packets are initiated by the MAC.
These are the only ways the digital
baseband portion will turn on the RF
transmitter, which it then turns off
at the end of the packet. Therefore,
the transmitter will be on only while
one of the aforementioned packets
is being transmitted. In other words,
this device automatically discontinue
transmission in case of either
absence of information to transmit or
operational failure.
Frequency Tolerance: ±20 ppm
For Customers in Canada
5 150-5 350 MHz band is restricted
to indoor operation only.
High-power radars are allocated
as primary users (i.e. priority users)
of the bands 5 250-5 350 MHz and
5 650-5 850 MHz and that these
radars could cause interference and/
or damage to LE-LAN devices.

Publicidad

loading