Gorilla Carts GOR865D11-1 Manual Del Usuario página 7

ASSEMBLY INSTRUCTIONS
5. Attach the rear axle assembly (E) with the
rear struts (C) and the rear frame (D) to the
tray (A) using five M8x25 internal button
head bolts (BB), one M8 x 20mm internal
button head bolt (CC), six M8 lock nuts (II),
and twelve M8 washers (FF), as shown in
Fig. 7.
Use the one M8 x 20mm internal button
head bolt (CC) in the front center location of
the rear frame (D), as shown in Fig. 7.
BB
A
Hole
Closer
to rear
of tray
Note correct
position of rear
frame as noted
in Step 4,
Figure 5.
E
Hardware Used
M8 x 25mm
BB
Internal Button
Head Bolt
M8 x 20mm
CC
Internal Button
Head Bolt
FF
M8 Flat
Washer
II
M8 Lock Nut
7
Fig. 7
CC
D
FF
II
Front
of tray
x 5
x 1
x 12
x 6