Gorilla Carts GOR865D11-1 Manual Del Usuario página 8

ASSEMBLY INSTRUCTIONS
6. Attach the rear frame (D) to the front
frame (F) using two M8 x 20mm internal
button head bolts (CC), two M8 lock nuts
(II), and two M8 washers (FF), as shown in
Fig. 8.
Hardware Used
CC M8 x 20mm
Internal Button
Head Bolt
FF
M8 Flat Washer
7. Attach the dump lock assembly (B) to the
tray (A) using three M8 x 20mm internal
button head bolts (CC), three M8 lock nuts
(II), and three M8 washers (FF), as shown in
Fig. 9.
If the dump lock assembly (B) does not
engage when you lower the cart tray (A),
please double check the placement of the
rear frame (D) in Step 4.
Hardware Used
CC M8 x 20mm
Internal Button
Head Bolt
FF
M8 Flat Washer
CC
x 2
x 2
A
B
x 3
x 6
8
Fig. 8
II
F
II
M8 Lock Nut
Fig. 9
CC
II
M8 Lock Nut
D
CC
FF
x 2
FF
II
x 3